LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> Pilot Special Edition, AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Cylinder Head Assembly - Service Information >> Removal and Installation >> Cylinder Head Sealing Bolt >> Removal and Installation

Removal and Installation

  1. Sealing Bolt and Washer - Remove
    Fig 1: FRONT Sealing Bolt and Washer Tightening Sequence
    GHH308252Courtesy of HONDA, U.S.A., INC.
    Fig 2: REAR Sealing Bolt and Washer Tightening Sequence
    GHH308253Courtesy of HONDA, U.S.A., INC.
  2. All Removed Parts - Install
    1. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals