LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> Pilot Special Edition, AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Cylinder Head Assembly - Service Information >> Removal and Installation >> CYLINDER HEAD COVER (6-Speed A/T), ('16-'18 9-Speed A/T) >> Removal >> Front

CYLINDER HEAD COVER (6-Speed A/T), ('16-'18 9-Speed A/T): Removal: Front

  1. Connector (Front Secondary HO2S) - Disconnect
  2. Intake Manifold (6-Speed A/T, '16-'18 9-Speed A/T)
  3. Front Cylinder Ignition Coil - Remove
  4. Connector and Positive Cable (Alternator) - Disconnect Alternator Removal and Installation - Step 5
  5. Front Cylinder Head Cover Harness Holder - Move
    GHH308188Courtesy of HONDA, U.S.A., INC.
    		 1. Disconnect the connectors (A).

    2. Remove the harness clips (B) and the connector clamp (C).

    3. Move the front cylinder head cover harness holder (D).
  6. Front Cylinder Head Cover - Remove
    GHH308189Courtesy of HONDA, U.S.A., INC.
    		 1. Remove the front cylinder head cover.

    2. Remove the heat insulator (A) as needed.
scientia non olet · About LEMON Manuals