Removal and Installation

TEL Antenna A

Courtesy of HONDA, U.S.A., INC.

TEL Antenna B

Courtesy of HONDA, U.S.A., INC.

TEL Antenna A 

1. Gauge Control Module - Remove Gauge Control Module - Removal
2. TEL Antenna A - Remove
3. All Removed Parts - Install

   1. Install the parts in the reverse order of removal.

TEL Antenna B 

1. Center Display Unit Assembly - Remove Center Display Unit Assembly - Removal 
2. Dashboard Center Speaker Trim - Remove Dashboard Center Speaker Trim - Removal
3. TEL Antenna B - Remove
4. All Removed Parts - Install

   1. Install the parts in the reverse order of removal.