LKAS activation indicator (on the MID) does not go off

NOTE:  The LKAS switch is contained in the ACC combination switch.

1. Gauge control module operation check

   -1. Do the gauge control module self-diagnostic function .

   Is the gauge control module OK?

   YES 

   Go to step 2.

   NO 

   Replace the gauge control module .

2. LKAS switch check

   -1. Turn the vehicle to the OFF (LOCK) mode.

   -2. Test the LKAS switch .

   Is the switch OK?

   YES 

   Repair a short to ground in the wire between the LKAS switch and the gauge control module.

   NO 

   Replace the LKAS switch .