Clutch Removal and Installation (M/T) (2016 2017 2018): Notes

WARNING: This page is about a different car, the 2018 Honda HR-V, 2017 Honda HR-V, and 2016 Honda HR-V. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

Image	Description/Tool Number
Courtesy of HONDA, U.S.A., INC.	Attachment, 22 x 24 mm 07746-001A800
Courtesy of HONDA, U.S.A., INC.	Driver Handle, 15 x 135L 07749-0010000
Courtesy of HONDA, U.S.A., INC.	Ring Gear Holder 07LAB-PV00100
Courtesy of HONDA, U.S.A., INC.	Clutch Alignment Shaft 07ZAF-PR8A100
Courtesy of HONDA, U.S.A., INC.	Slide Hammer 07936-371020A
Courtesy of HONDA, U.S.A., INC.	Bearing Remover Shaft Set, 20 mm 07936-3710600
Courtesy of HONDA, U.S.A., INC.	Remover Handle 07936-3710100
Courtesy of HONDA, U.S.A., INC.	Clutch Alignment Disc 07JAF-PM7011A