DTC 95-11

DTC 95-11  : Clutch Pedal Stroke Sensor Failure

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTCs (VSA)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC	Freeze Frame
   95-11 Clutch Pedal Stroke Sensor CPS1/CPS2 Incorrect Voltage Correlation

   Is DTC 95-11 indicated?

   YES 

   The failure is duplicated. Go to electrical parking brake system troubleshooting.

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .