DTC 83-16

DTC 83-16  : Shift Position Signal Malfunction

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTCs (VSA)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC	Freeze Frame
   83-16 Shift Position Signal Malfunction

   Is DTC 83-14 indicated?

   YES 

   Go to CVT system troubleshooting.

   NO 

   Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.