DTC Troubleshooting: U3000-49 (Gauge Control Module)

DTC U3000-49  : ECU internal circuit malfunction

DTC (Gauge Control Module)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Wait for at least 6 seconds.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-49 ECU internal circuit malfunction

   Is DTC U3000-49 indicated?

   YES 

   Replace the gauge control module .

   NO 

   Intermittent failure, the system is OK at this time.