DTC U0337 (618)
DTC U0337 : Battery Charge Control Module Programming Error (Version Mismatch)
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- This DTC is indicated when the battery charge control module update procedure is not completed.
- Do not press the power switch button while updating the battery charge control module. If you do, the battery charge control module can be damaged.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| U0337 Battery Charge Control Module Programming Error (Version Mismatch) |
DTC (Electric Powertrain)
- Problem verification (update)
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Update the battery charge control module .
-4. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame U0337 Battery Charge Control Module Programming Error (Version Mismatch) Is DTC U0337 indicated?
YES
Check for any authorized service information related to the DTC(s) or symptoms you are troubleshooting or substitute a known-good battery charge control module .
NO
The update is complete. If any other Pending or Confirmed DTC is indicated, go to the indicated DTC's troubleshooting.