DTC U0110 (Battery Condition Monitor Module A)
DTC U0110 : CAN Malfunction (Battery Condition Monitor Module A - Traction Motor Control Module)
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- If any of the DTCs listed below are indicated at the same time as DTC U0110, troubleshoot those DTCs first, then recheck for U0110.
-
- U1205
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| U0110 CAN Malfunction (Battery Condition Monitor Module A - Traction Motor Control Module) |
DTC (Electric Powertrain)
- DTC check
-1. Turn the vehicle to the ON mode.
-2. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame Are DTC U0110 and any other DTCs indicated at the same time?
YES
Go to the indicated DTC(s) troubleshooting.
NO
Check for any authorized service information related to the DTC(s) or symptoms you are troubleshooting or substitute a known-good battery condition monitor module A .