DTC U0029 (108) (Battery Condition Monitor Module B)
DTC U0029 : F-CAN Malfunction (Battery Condition Monitor Module B Bus-Off)
NOTE:
Before you troubleshoot, review the general troubleshooting information
.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| U0029 F-CAN Malfunction (Battery Condition Monitor Module B Bus-Off) |
DTC (Electric Powertrain)
- CAN gateway system DTC check
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode, and wait for 6 seconds.
-5. Check for CAN gateway system DTCs with the HDS.
DTC Description DTC DTC (CAN Gateway)
Are any DTCs indicated?
YES
Go to the troubleshooting for CAN gateway system DTC(s) .
NO
Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.