DTC U3000-51
DTC U3000-51 : CAN Gateway Programming Error
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- This DTC is indicated when the CAN gateway update is not completed.
| DTC Description | DTC |
|---|---|
| U3000-51 CAN Gateway Programming Error |
DTC (CAN GATEWAY)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode.
-5. Check for DTCs with the HDS.
DTC Description DTC U3000-51 CAN Gateway Programming Error DTC (CAN GATEWAY)
Is DTC U3000-51 indicated?
YES
NO
Intermittent failure, the system is OK at this time.