Stall speed low

Probable cause(s)

• TCM defective (1.5 L engine)
• PCM defective (except 1.5 L engine)
• Engine output low
• Valve body assembly defective
• Joint pipes defective
• Stator shaft worn or damaged
• Torque converter assembly defective
• Torque converter ring gear worn or damaged
• Transmission assembly and drive plate installation defective

Notes 

• Adjust the engine output.
• Check the valve body assembly for wear and damage.
• Check the joint pipes and O-rings for wear and damage.
• Check the stator shaft for wear and damage.
• Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly .