DTC Troubleshooting: P1841(CVT (TCM))
DTC P1841 : CVT Speed Sensor Circuit Reverse Rotation Range/Performance
NOTE: Before you troubleshoot, review the General Troubleshooting Information .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P1841 CVT Speed Sensor Circuit Reverse Rotation Range/Performance |
DTC(CVT)
- CVT speed sensor check
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Raise the vehicle on a lift. Make sure it is securely supported, and allow all four wheels to rotate freely.
-4. Enter the VSA maintenance mode .
-5. Test-drive the vehicle in R position/mode at speeds over 19 mph (30 km/h) for at least 5 seconds.
-6. Check the parameter(s) below with the HDS while running the vehicle in R position/mode.
Signal Threshold Current conditions Values Unit Values Unit Direction of Secondary-shaft Rotation Reverse Do the current condition(s) match the threshold?
YES
The CVT speed sensor is OK. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or replace the original TCM .
NO