DTC Troubleshooting: P0602(CVT (TCM))

DTC P0602  : Boot Mode(Programming Error)

NOTE: 

• Before you troubleshoot, review the General Troubleshooting Information .
• This DTC is indicated when the TCM update procedure is not completed.
• Do not turn the vehicle to the OFF (LOCK) mode while updating the TCM. If you do, the TCM can be damaged.

DTC(CVT)

1. Problem verification (update)

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Update the TCM .

   -4. Turn the vehicle to the OFF (LOCK) mode.

   -5. Turn the vehicle to the ON mode.

   -6. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0602 Boot Mode(Programming Error)

   Is DTC P0602 indicated?

   YES 

   The failure is duplicated. Replace the TCM .

   NO 

   Update is complete.