Airbag Handling and Storage

Do not disassemble an airbag. It has no serviceable parts. Once an airbag has been deployed, it cannot be repaired or reused.

For temporary storage of an airbag during service, observe the following precautions.

• Store the removed airbag with the pad surface up. Never put anything on the airbag.

Courtesy of HONDA, U.S.A., INC.

• To prevent damage to the airbag, keep it away from any oil, grease, detergent, or water.

Courtesy of HONDA, U.S.A., INC.

• Store the removed airbag on a secure, flat surface away from any high heat source (exceeding 200 deg.F (93 deg.C)).

• Never do electrical tests on the airbags, such as measuring resistance.

• Do not position yourself in front of the airbag during removal, inspection, or replacement.

Courtesy of HONDA, U.S.A., INC.

• For proper disposal of a damaged airbag or tensioner, refer to Airbag and Tensioner Disposal .