Checks Before Using the Sensor Input Display Mode

1. Turn the vehicle to the ON mode, and check the recirculation door function; press the RECIRCULATION button to switch from FRESH to RECIRCULATE. The air volume and sound should change slightly.Set the TEMPERATURE CONTROL dial to the desired test temperature:

• "Lo" temperature setting will default to MAX COOL, VENT, and RECIRCULATE (A/C on) or FRESH (A/C off).
• "Hi" temperature setting will default to MAX HOT, HEAT, HEAT/DEF and FRESH.

3. Turn the vehicle to the OFF (LOCK) mode.