Real Time AWD System Symptom Troubleshooting - Real time AWD system indicator does not come on
WARNING: This page is about a different variant/trim than selected.
- Problem verification
-1. Turn the vehicle to the ON mode.
Does the AWD system indicator come on?
YES
Intermittent failure, the system is OK at this time.
NO
The failure is duplicated. Go to step 2.
- Gauge control module operation check
-1. Do the gauge control module self-diagnostic function .
Does the AWD system indicator blinkΩ
YES
Go to step 3.
NO
- AWD control unit check
-1. Turn the vehicle to the OFF (LOCK) mode.
-2. Remove the following fuse.
Fuse No. A4-3 B7 -3. Turn the vehicle to the ON mode.
Does the AWD system indicator come on?
YES
The gauge control module is OK. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good AWD control unit .
NO