Crankshaft Pulley, Cam Chain, and Oil Pump Removal and Installation: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools Required
| Image |
Description/Tool Number |
 Courtesy of HONDA, U.S.A., INC.
|
Holder Attachment, 50 mm, Offset 07MAB-PY3010A or 07MAB-PY3010B |
 Courtesy of HONDA, U.S.A., INC.
|
Socket, 19 mm 07JAA-001020A or equivalent |
 Courtesy of HONDA, U.S.A., INC.
|
Holder Handle 07JAB-001020B |
 Courtesy of HONDA, U.S.A., INC.
|
Oil Seal Driver 07LAD-PT3010A |