Multipurpose Camera Unit Connector for Inputs and Outputs
WARNING: This page is about a different variant/trim than selected.
Multipurpose Camera Unit 12P Connector (female terminals)
| Terminal number | Terminal name | Description |
| 1 | IG1_OPTION | Power source for the multipurpose camera unit |
| 2 | GND | Ground circuit for the multipurpose camera unit |
| 3 | Not used | - |
| 4 | Not used | - |
| 5 | F-CAN C_L | F-CAN communication (low) circuit |
| 6 | ACC-CAN_L | ACC-CAN communication (low) circuit |
| 7 | LDW OFF SW | Detects RDM switch signal |
| 8 | LDW OFF IND | Drive RDM switch circuit |
| 9 | Not used | - |
| 10 | Not used | - |
| 11 | F-CAN C_H | F-CAN communication (high) circuit |
| 12 | ACC-CAN_H | ACC-CAN communication (high) circuit |