DTC P0606-00
DTC P0606-00 : Electric Servo Brake Control Unit Internal Circuit Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | DTC | Freeze Frame |
|---|---|---|
| P0606-00 Electric Servo Brake Control Unit Internal Circuit Malfunction |
DTC (Electric servo brake)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTCs with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Wait 10 seconds or more.
-5. Turn the vehicle to the ON mode.
-6. Check for DTCs with the HDS.
DTC Description DTC Freeze Frame P0606-00 Electric Servo Brake Control Unit Internal Circuit Malfunction Is DTC P0606-00 indicated?
YES
The failure is duplicated. Check for loose terminals and poor connections in the electric servo brake control unit 22P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the electric servo brake control unit/pedal feel simulator .
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.