LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (Electric Servo Brake System - DTC Diagnostics (Hybrid)) >> DTC Troubleshooting >> DTC B0050-F0 (Electric Servo Brake Control Unit)

DTC B0050-F0 (Electric Servo Brake Control Unit)

WARNING: This page is about a different variant/trim than selected.

DTC B0050-F0  : (Driver's Seat Belt Buckle Switch Malfunction)

NOTE: Before you troubleshoot, review the general troubleshooting information .

DTC Description DTC Freeze Frame
B0050-F0 (Driver's Seat Belt Buckle Switch Malfunction)    

DTC (Electric servo brake)

  1. Problem verification

    -1. Turn the vehicle to the ON mode.

    -2. Clear the DTCs with the HDS.

    -3. Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

    -4. Check for DTCs with the HDS.

    DTC Description DTC Freeze Frame
    B0050-F0 (Driver's Seat Belt Buckle Switch Malfunction)    

    Is DTC B0050-F0 indicated?

    YES 

    The failure is duplicated. Go to SRS troubleshooting .

    NO 

    Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.