Removal and Installation: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Due to the high temperatures of the exhaust system, the exhaust nut, studs and bolts may seize preventing easy removal. If you encounter a seized condition, do the following.
-
- Apply rust penetrant to the nut/stud or bolt.
- Allow the penetrant to sit. The amount of time may vary.
- Lightly tap the nut/stud or bolt with a hammer.
- Slowly loosen the nut or bolt.
- If the nut or bolt still will not loosed, repeat steps
to
.