LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control System / Engine Mechanical - Testing & Troubleshooting (Hybrid)) >> General Information >> How to Set Readiness Codes >> Evaporative Emission (EVAP) Control System Monitor and Readiness Code

Evaporative Emission (EVAP) Control System Monitor and Readiness Code

WARNING: This page is about a different variant/trim than selected.

NOTE:  All readiness codes are cleared when the 12 volt battery is disconnected, if DTCs have been cleared, or if the PCM is reset with the HDS.

Enable Criteria 

Refer to the following DTC.

Procedure 

Refer to the following DTC.

NOTE:  Do not FUNCTION TEST with the HDS.

scientia non olet · About LEMON Manuals