Dirt or Dust Detective Function (CLEAN FRONT WINDSHIELD Indication)

If the following message appears on the MID, the camera lens or the windshield has enough dirt so that the camera view is obstructed, the CMBS stops operating.

Clean any dirt or contamination on the camera lens or the windshield. Once the camera's view is unobstructed, the indicator on the MID turns off and the CMBS automatically turns back to ON.

NOTE:  When millimeter wave radar detected dirt or dust on the multipurpose camera lens or the windshield surface, DTC B2A60-97 is stored as a past failure.

Courtesy of HONDA, U.S.A., INC.