How to Troubleshoot DTCs

Check the DTCs with the HDS.

Before troubleshooting, check and note these items:

• Ask the customer about the conditions when the problem occurred, and try to reproduce the same conditions for troubleshooting.
• After the troubleshooting or repairs are done, clear the DTCs, and test-drive the vehicle under the same conditions as when the DTC was originally set. Make sure the BSI indicator does not come on.
• The BSI system sometimes stops operating because of the environment (weather, road conditions, driving conditions, etc.). A DTC may be stored in these cases.

Some DTCs may be stored even when the system is OK. For example, the BSI indicator may come on with one or more of these DTCs: