DTC U3000-51 (CAN Gateway)

DTC U3000-51  : CAN Gateway Programming Error

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• This DTC is indicated when the CAN gateway update is not completed.

DTC (CAN GATEWAY)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Check for DTCs with the HDS.

   DTC Description	DTC
   U3000-51 CAN Gateway Programming Error

   Is DTC U3000-51 indicated?

   YES 

   Reprogram the CAN gateway .

   NO 

   Intermittent failure, the system is OK at this time.