DTC P1D3A (1085), P1D3B (1086)
DTC P1D3A : Battery Condition Monitor Module EEPROM Error (FSA Operated)
DTC P1D3B : Battery Condition Monitor Module EEPROM Error (FSA Not-Operated)
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P1D3A Battery Condition Monitor Module EEPROM Error (FSA Operated) | |||
| P1D3B Battery Condition Monitor Module EEPROM Error (FSA Not-Operated) |
DTC (Electric Powertrain)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode.
-5. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P1D3A Battery Condition Monitor Module EEPROM Error (FSA Operated) P1D3B Battery Condition Monitor Module EEPROM Error (FSA Not-Operated) Is DTC P1D3A or P1D3B indicated?
YES
Replace the battery condition monitor module .
NO
Intermittent failure. The system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.