DTC P0E2D (1055)
WARNING: This page is about a different variant/trim than selected.
DTC P0E2D : HV Battery Cell Voltage Sense Circuit
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P0E2D HV Battery Cell Voltage Sense Circuit |
DTC (Electric Powertrain)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode.
-5. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P0E2D HV Battery Cell Voltage Sense Circuit Is DTC P0E2D indicated?
YES
Replace the battery condition monitor module .
NO
Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.