DTC P0DE7 (125)

DTC P0DE7  : HV Battery Pack Voltage High

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. DTC check

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode, and wait for 10 seconds.

   -5. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame

   DTC (Electric Powertrain)

   Are DTC P0DE7 and any other DTCs indicated at the same time?

   YES 

   Go to the indicated DTC's troubleshooting.

   NO 

   Go to step 2.

2. Problem verification

   -1. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0DE7 HV Battery Pack Voltage High

   Is DTC P0DE7 indicated?

   YES 

   Replace the battery pack , the battery condition monitor module , the PCU , and the PCM .

   NO 

   Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.