LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System - DTC Diagnostics (1 Of 3) (Hybrid)) >> How to Information >> How to Troubleshoot the Fuel and Emissions Systems >> How to End a Troubleshooting Session (required after any troubleshooting)

How to End a Troubleshooting Session (required after any troubleshooting)

WARNING: This page is about a different variant/trim than selected.

1. Reset the PCM with the HDS.

2. Turn the vehicle to the OFF (LOCK) mode.

3. Disconnect the HDS from the DLC.

NOTE:  The PCM is part of the immobilizer system. If you replace the PCM, you must register the keyless access system.

scientia non olet · About LEMON Manuals