DTC U0418-68 (VSA Control Unit)
WARNING: This page is about a different variant/trim than selected.
DTC U0418-68 : (ESB/EBB Failure)
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | DTC |
|---|---|
| U0418-68 (ESB/EBB Failure) |
DTC (VSA)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode, then to the READY TO DRIVE mode.
-4. Check for DTCs with the HDS.
DTC Description DTC U0418-68 (ESB/EBB Failure) Is DTC U0418-68 indicated?
YES
The failure is duplicated. Go to electric servo brake system troubleshooting .
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting .