LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (VSA System - DTC Diagnostics (2 Of 2) (Hybrid)) >> DTC Troubleshooting >> DTC P1DA6 (443), P1DA8 (447), P1DAA (451)

DTC P1DA6 (443), P1DA8 (447), P1DAA (451)

WARNING: This page is about a different variant/trim than selected.

DTC P1DA6  : VCU V1 Voltage Sensor Circuit Range/Performance

DTC P1DA8  : VCU V2M Voltage Sensor Circuit Range/Performance

DTC P1DAA  : VCU V2S Voltage Sensor Circuit Range/Performance

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC Description Confirmed DTC Pending DTC Freeze Frame
P1DA6 VCU V1 Voltage Sensor Circuit Range/Performance      
P1DA8 VCU V2M Voltage Sensor Circuit Range/Performance      
P1DAA VCU V2S Voltage Sensor Circuit Range/Performance      

DTC (Electric Powertrain)

  1. Problem verification

    -1. Turn the vehicle to the ON mode.

    -2. Clear the DTC with the HDS.

    -3. Turn the vehicle to the OFF (LOCK) mode.

    -4. Turn the vehicle to the READY TO DRIVE mode.

    -5. Position to D, and release the brake pedal.

    -6. Check for Pending or Confirmed DTCs with the HDS.

    DTC Description Confirmed DTC Pending DTC Freeze Frame
    P1DA6 VCU V1 Voltage Sensor Circuit Range/Performance      
    P1DA8 VCU V2M Voltage Sensor Circuit Range/Performance      
    P1DAA VCU V2S Voltage Sensor Circuit Range/Performance      

    Is DTC P1DA6, P1DA8 and/or P1DAA indicated?

    YES 

    Replace the PCU .

    NO 

    Intermittent failure. The system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.