DTC P0A2F (313)

DTC P0A2F  : Traction Motor Over Temperature

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. Problem verification

   -1. Test-drive the vehicle in the range of the recorded freeze data parameters.

   Freeze Data

   -2. Monitor the OBD STATUS for DTC P0A2F in the DTCs MENU with the HDS.

   DTC Description	OBD STATUS
   P0A2F Traction Motor Over Temperature

   Does the HDS indicate FAILED?

   YES 

   Go to step 2.

   NO 

   If the HDS indicates PASSED, the system is OK at this time but has an intermittent failure. If the HDS indicates NOT COMPLETED, keep test-driving until an indication comes on. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.

2. ATF check

   -1. Turn the vehicle to the OFF (LOCK) mode.

   Check these items:

   • Check the ATF level .
   • Check for deteriorated ATF.
   • Check for any ATF leakage (from gaskets, hoses, O-rings, etc.).
   • Check for dirt, leaves, or insects on ATF cooler.

   Is it OK?

   YES 

   Replace the transmission (e-CVT) assembly .

   NO 

   Repair or replace parts as needed.