DTC P0A7E (72)
WARNING: This page is about a different variant/trim than selected.
DTC P0A7E : HV Battery Pack Over Temperature
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- If the battery condition monitor module detects this DTC, the battery cannot be reused because it is damaged by overheating. Even if this failure does not duplicate, the battery must be replaced.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P0A7E HV Battery Pack Over Temperature |
DTC (Electric Powertrain)
- Battery cooling system visual check
-1. Check the cause of overheating (the IPU air duct and the high voltage battery module fan for disconnections, damage, or obstructions).
Is there any abnormality?
YES
After solving the problem, replace the battery pack .
NO
The battery cooling system is OK, replace the battery pack .