DTC P1A48, P1A49, P1A4A
DTC P1A48 : PCM Internal Malfunction (SBW Different Run)
DTC P1A49 : PCM Internal Malfunction (SBW Parking Position)
DTC P1A4A : PCM Internal Malfunction (SBW Display Position)
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P1A48 PCM Internal Malfunction (SBW Different Run) | ||
| P1A49 PCM Internal Malfunction (SBW Parking Position) | ||
| P1A4A PCM Internal Malfunction (SBW Display Position) |
DTC (PGM-FI)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the READY TO DRIVE mode.
-5. Wait 10 seconds or more with the shift position in P.
-6. Wait 10 seconds or more with each shift position in R, N, D.
-7. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P1A48 PCM Internal Malfunction (SBW Different Run) P1A49 PCM Internal Malfunction (SBW Parking Position) P1A4A PCM Internal Malfunction (SBW Display Position) Is DTC P1A48, P1A49, and/or P1A4A indicated?
YES
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM .
NO
Intermittent failure, the system is OK at this time. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .