DTC P172B

WARNING: This page is about a different variant/trim than selected.

DTC P172B : KEY-Release Switch Input Circuit Malfunction

NOTE: Before you troubleshoot, review the General Troubleshooting Information .

DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
P172B KEY-Release Switch Input Circuit Malfunction

DTC (Gear)

Problem verification

-1. Turn the vehicle to the ON mode.

-2. Clear the DTC with the HDS.

-3. Turn the vehicle to the OFF (LOCK) mode.

-4. Turn the vehicle to the ON mode and wait for at least 1 minute.

-5. Monitor the OBD STATUS for P172B in the DTCs MENU with the HDS.

DTC Description	OBD Status
P172B KEY-Release Switch Input Circuit Malfunction

Does the HDS indicate FAILED?

YES

The failure is duplicated. Faulty SBW shifter control module. Replace the SBW shifter assembly .

If the HDS indicates PASSED, intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot. If the HDS indicates NOT COMPLETED, go to step 1