DTC P062F (PGM-FI System)
WARNING: This page is about a different variant/trim than selected.
DTC P062F : PCM Internal Control Module Keep Alive Memory (KAM) Error
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC |
|---|---|---|
| P062F PCM Internal Control Module Keep Alive Memory (KAM) Error |
DTC (PGM-FI)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC P062F PCM Internal Control Module Keep Alive Memory (KAM) Error Is DTC P062F indicated?
YES
Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM .
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot .