Fuel Line/Quick-Connect Fitting Precautions: Notes
WARNING: This page is about a different variant/trim than selected.
WARNING:
Flammable - Keep Fire Away
NOTE:
- Refer to the Fuel and Emissions Systems Service Precautions before disconnecting the fuel line.
- Fuel may cause flammable gas leaks and may result in fire. Keep sparks, flame and cigarettes away.
- Replace the fuel feed hose, fuel line, or the quick-connect fitting to new one if it is damaged.
When removing or installing the fuel feed hose/line, or when disconnecting or connecting the quick-connect fittings, pay attention to the following:
- No heat-resistance; Be careful not to damage them during welding or other heat-generating procedures.
- No acid-proof; Do not touch them with a shop towel that was used for wiping 12 volt battery electrolyte or something similar.
- No stress-resistance; Be careful not to bend or twist the fuel feed hose/line excessively.