How to Enter Neutral Position Holding Mode: Procedure

WARNING: This page is about a different variant/trim than selected.

NOTE:

This function is automatically canceled after elapsed about 15 minutes from entering the neutral position holding mode.
Even if the negative terminal of the 12 volt battery is disconnected after the neutral position holding mode is started, the vehicle continues to keep the N position/mode.

Neutral Position Holding Mode - Enter

1. Park the vehicle on level ground, and block all four wheels.

2. Turn the vehicle to the READY TO DRIVE mode.

3. Press and hold the brake pedal.

4. Press and release the N position/mode to shift the transmission to Neutral.

5. Press N again, and hold it for 2 seconds. The vehicle will enter neutral hold.