Automatic Lighting Control Unit-Sensor Connector for Inputs and Outputs
WARNING: This page is about a different variant/trim than selected.
Automatic Lighting Control Unit-Sensor 5P Connector (female terminals)
| Terminal number | Terminal name | Description | Signal |
|---|---|---|---|
| 1 | B-CAN_H | Communication line | --- |
| 2 | B-CAN_L | Communication line | --- |
| 3 | GND | Automatic lighting control unit-sensor ground | Less than 0.2 V at all times |
| 4 | +B_BACK_UP | +B power source | About battery voltage at all times |
| 5 | H/L_ON_SW | Detects combination light switch (ON) signal | With combination light switch is in ON position: less than 0.2 V With combination light switch is in AUTO position and the conditions for the headlight to be ON: less than 0.2 V If none of above conditions are met: about battery voltage |