DTC B2375

DTC B2375  : Rain Sensing malfunction in Rain/Light sensor

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Body Control Module)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Check for DTCs with the HDS.

   DTC Description	DTC
   B2375 Rain Sensing malfunction in Rain/Light sensor

   Is DTC B2375 indicated?

   YES 

   Go to step 2.

   NO 

   Intermittent failure, the system is OK at this time. Check for loose or poor connections.

2. Connector check

   -1. Check for loose or poor connections at the automatic lighting/rain sensor 5P connector.

   Is the connection OK?

   YES 

   Go to step 3.

   NO 

   Reconnect or repair the connector.

3. Rain sensor visual check

   -1. Remove the automatic lighting/rain sensor .

   -2. Check for dirt and dust on the surface of the automatic lighting/rain sensor.

   Is it dirty?

   YES 

   Clean the rain sensor, and then recheck the system.

   NO 

   Go to step 4.

4. Windshield glass visual check:Is it dirty or damaged?

   YES 

   Clean the windshield and, if necessary, repair or replace the windshield glass.

   NO 

   Replace the automatic lighting/rain sensor .