LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Interior Trim - Service Information (Hybrid)) >> Removal and Installation >> Grab Handle Removal and Installation >> Installation

Grab Handle Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Grab Handle - Install
    GHH379673Courtesy of HONDA, U.S.A., INC.
    		 1. Position the grab handle (A) on the grab handle bracket (B).

    2. Push on the grab handle until the clips (C) snap into place securely.

    3. Install the caps (D) fully into the clips.
scientia non olet · About LEMON Manuals