Body Electrical Troubleshooting - B-CAN System Diagnosis Test Mode B - Control Unit Not Communicating

Do this diagnosis if any of the control units are not communicating (NOT AVAILABLE is displayed in the HDS) as found by the B-CAN System Diagnosis Test Mode A .

1. Using the HDS, select the system that has the symptom from the BODY ELECTRICAL SYSTEM SELECT menu.

2. Select DTCs, and then check for loss of communication DTCs.

• -

  If any loss of communication DTCs are indicated, go to step 3.

• -

  If any loss of communication DTCs are not indicated, replace the body control module .

Do the power, ground, and communication part of the input test for the unit(s) not communicating with the HDS.

• Acoustic vehicle alerting control unit
• Automatic lighting control unit-sensor
• Body Control Module
• BSI radar unit
• Climate control unit
• Front seat heater control unit
• Gauge control module
• Keyless access control unit
• Door multiplex control unit
• Parking and back-up sensor control unit
• Power seat control unit
• Power tailgate control unit
• Relay control module
• Wireless charger