Audio-Navigation System DTC 2706 (Navigation Unit)

DTC 2706  : Gyro Diag: ECU Temp XX °C

NOTE: 

• Check the vehicle 12 volt battery condition first .
• This navigation DTC sets when NG is indicated in the GYRO sensor diagnosis (the Gyro Sensor icon is red in the System Links), and indicates the gyro sensor temperature when the DTC is detected.
• Before you troubleshoot, make sure to follow the General Troubleshooting Information .

1. Problem verification

   -1. Clear the hard error codes .

   -2. Turn the vehicle to the OFF (LOCK) mode.

   -3. Wait for at least 6 seconds.

   -4. Check for hard error codes .

   Is DTC 2706 indicated?

   YES 

   Replace the audio-navigation unit .

   NO 

   Intermittent failure, the system is OK at this time.