DTC B1140

DTC B1140  : Driver's power window position detect circuit malfunction

NOTE:  If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A .

DTC (Multiplex Control Unit, Door)

1. Problem verification

   -1. Clear the DTCs with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

   -3. Open and close the driver's power window by using the power window master switch manually.

   -4. Check for DTCs with the HDS.

   DTC Description	DTC
   B1125 Driver's power window motor A pulse malfunction
   B1126 Driver's power window motor B pulse malfunction

   Is DTC B1125 or B1126 indicated?

   YES 

   Troubleshoot DTC B1125  or B1126 .

   NO 

   Resetting the power window master switch .