DTC P0630 (2.4 L Engine) (2017 2018 2019)

DTC P0630  : VIN Not Programmed or Mismatch

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• This DTC is stored only when the PCM does not have the VIN information of the vehicle. Use the HDS to input the missing VIN information.

DTC (PGM-FI)

1. VIN check

   -1. Turn the vehicle to the ON mode.

   -2. Check the VIN with the HDS.

   Does the HDS show the vehicle's VIN?

   YES 

   Go to step 4.

   NO 

   Go to step 2.

2. VIN check (rewrite)

   -1. Input the correct VIN to the PCM with the HDS.

   Does the HDS show COMPLETE?

   YES 

   Go to step 4.

   NO 

   Go to step 3.

3. DTC check

   -1. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC
   P0630 VIN Not Programmed or Mismatch

   Is DTC P062F indicated?

   YES 

   Go to the troubleshooting for DTC P062F .

   NO 

   Go to step 4.

4. PCM check

   -1. Clear the DTC with the HDS.

   -2. Turn the vehicle to the OFF (LOCK) mode.

   -3. Turn the vehicle to the ON mode, and wait 5 seconds.

   -4. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC
   P0630 VIN Not Programmed or Mismatch

   Is DTC P0630 indicated?

   YES 

   Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good PCM .

   NO 

   Intermittent failure, the system is OK at this time. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.