LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System - DTC Diagnostics (B24BA - U0301) (Except Hybrid) >> How To Information >> How to Troubleshoot the Fuel and Emissions Systems >> How to End a Troubleshooting Session (required after any troubleshooting)

How to End a Troubleshooting Session (required after any troubleshooting)

1. Reset the PCM with the HDS .

2. Do the PCM idle learn procedure

3. Turn the vehicle to the OFF (LOCK) mode.

4. Disconnect the HDS from the data link connector.

NOTE:  The PCM is part of the immobilizer system. If you replace the PCM, you must register the PCM to the keyless access system.

scientia non olet · About LEMON Manuals