LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2021 >> CR-V EX-L, AWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System - DTC Diagnostics (B24BA - U0301) (Except Hybrid) >> How To Information >> How to Troubleshoot the Fuel and Emissions Systems >> CHECK SYSTEM Display Indication (CHECK STARTING SYSTEM)

CHECK SYSTEM Display Indication (CHECK STARTING SYSTEM)

1. If this indicator comes on in the gauge control module, the starting system may have had a failure. Connect the HDS to the data link connector located under the driver's side of the dashboard. Check the diagnostic trouble code (DTC) and note it. Then refer to the indicated DTCs troubleshooting, and begin the appropriate troubleshooting procedure.

USA models 

GHH426645Courtesy of HONDA, U.S.A., INC.

Except USA models 

GHH426646Courtesy of HONDA, U.S.A., INC.
scientia non olet · About LEMON Manuals