Engine Oil Pan Removal and Installation (2.4 L Engine) (2017 2018 2019): Removal

NOTE:  Where icon is shown for further information in the information below.

1 

Courtesy of HONDA, U.S.A., INC.

	Detailed information, notes, and precautions
	Replace

1. Engine Undercover - Remove
2. Drive Belt - Remove
3. A/C Compressor - Move

   NOTE: 

   • Do not disconnect the A/C hoses.
   • Do not bend the A/C hoses excessively.
   • Hang the A/C compressor with a wire tie.
4. Engine Oil - Drain
5. Exhaust Pipe A - Remove
6. Engine - Support

   1. Support the engine with a transmission jack and a wood block under the oil pan.

7. Lower Torque Rod and Lower Torque Rod Bracket - Remove 
8. Torque Converter Case Cover - Remove
9. Oil Pan - Remove

   Courtesy of HONDA, U.S.A., INC.

   1. Remove the bolts securing the oil pan. 2. Using a flat blade screwdriver, separate the oil pan from the lower block in the places shown.

   Courtesy of HONDA, U.S.A., INC.

   3. Remove the oil pan.